Product Details：

KEBA 74694 is a Compact Flash memory card adapter module for KEBA KePlast and Kemro K2 control racks, widely matched with CP031 and CP033 series CPU controllers on ENGEL injection molding machines. It acts as the dedicated interface for CF memory cards, used for offline program backup, molding recipe import and export, controller firmware upgrade and mold parameter cloning.

This module connects to the main CPU through the Kemro backplane bus. Operators and maintenance technicians can save complete machine configuration parameters, multi-cavity mold recipes and production curve data onto the CF card, or load pre-stored parameter sets into the CPU rapidly when changing molds. It is very helpful to unify machine settings and reduce the debugging time of mold switching. It supports stable read and write verification mechanism to avoid loading corrupted data and causing abnormal injection actions.

It carries card detection and read-write monitoring circuit. When the CF card is loose, damaged, format mismatched or data checksum fails, it will send alarm feedback to the main controller and display prompt information on the HMI. The front status LED can directly indicate card presence and communication state for quick troubleshooting. The circuit board adopts conformal coating treatment, with good vibration resistance and EMC performance, adapting to dusty and oil mist plastic workshop environment.

It adopts standard plug-in rack installation structure and needs to match the corresponding Kemro backplane and supporting CPU. This part number 74694 has been discontinued by KEBA factory, mainly circulated as maintenance spare part for mid-generation ENGEL hydraulic injection molding machines. Direct replacement can restore the offline recipe exchange function without modifying the original wiring and other rack modules.

It is a frequently searched spare part in plastic machinery maintenance market, providing convenient offline data exchange function for legacy KePlast control systems.

Key specifications：KEBA 74694 CF card adapter module,24VDC power supply from backplane bus,Compact Flash card slot,rack plug-in mounting,IP20. Operating temperature range: 0°C to +55°C. It supports CF card read-write test, recipe import export verification and K-Bus communication handshake check during maintenance.

This 74694 card adapter cooperates with KEBA main CPU to realize convenient offline storage and migration of injection molding recipes, greatly improving the efficiency of mold change and machine parameter debugging.