Product Details:

ATLAS COPCO TC52P-N-DECTLM is a high-power servo drive in the TC52 family, equipped with native DECTLM dedicated communication link, built to drive Atlas Copco low and medium torque servo electric nutrunners for precision bolt fastening. The suffix N stands for standard single-channel configuration, paired with the reliable DECTLM interface for stable point-to-point communication with the host controller. It delivers steady high continuous output to sustain repeated fastening cycles on automated production lines. Operators can define torque, angle, rotational speed and multi-step tightening sequences via dedicated Atlas Copco configuration software. Every fastening cycle is recorded and stored locally, supporting full process traceability for quality audits and production tracking. It adopts compact cabinet mounting, occupying limited cabinet space and fitting well in manual assembly stations, robotic fastening cells and small fixtured multi-spindle stations. It integrates comprehensive hardware protection functions including over current, over voltage, short circuit and over temperature protection to protect the drive and connected tightening tool under long continuous operation. It exchanges fastening results and receives trigger commands through the DECTLM port, while isolated digital I/O terminals are reserved for tool ready status and fault handshake signals. It is widely used in auto parts, electronic assembly and general machinery production requiring single-channel high-power output and dedicated DECTLM communication connection.

Basic Parameters

1. Compatible tools: low and medium torque Atlas Copco servo electric nutrunners matching TC52 drive series

2. Max stored programs: configurable via software

3. Input voltage: 200‑400V AC, three phase, 50/60Hz

4. Power consumption: high compact capacity for medium load fastening tools

5. Mounting method: cabinet mounting

6. Communication: DECTLM interface, isolated digital input and output terminals

7. License levels: Standard Supported Tightening Strategies

8. Torque control with angle monitoring

9. Angle control with torque supervision

10. Dynatork prevailing torque compensation

11. Yield point detection

12. Fastener seating control Core Functions

13. Batch counting and Poka-Yoke error proofing

14. Statistical process value recording

15. Complete tightening data storage: torque, angle, timestamp, batch ID, tool serial number, OK/NOK result

16. LED fault indication for quick on-site troubleshooting

17. DECTLM and digital interface connection for remote program download, trigger control and real-time result feedback Hardware Specifications & Environmental Features

18. Built-in EMC filter and surge suppression circuit

19. Operating ambient temperature: 0°C ~ +45°C

20. Protection grade: IP20

21. N means single channel standard version, DECTLM refers to dedicated communication link

22. Status: Discontinued original model, available as replacement spare part Test items before shipment

23. Power supply circuit test

24. Servo drive and tool communication test

25. DECTLM interface communication test

26. Digital I/O signal handshake test

27. Overload protection function test

28. Firmware compatibility verification

Industry Applications: Applied in petrochemical auxiliary skids, gas flow control systems, boiler closed-loop control rooms and water treatment facilities for conventional analog signal acquisition and valve regulating output.

Note: Confirm SAM combined I/O feature and hardware revision before ordering

This is from our current stock.

available stock.xlsx