Product Details:

ATLAS COPCO TC52P-I belongs to the TC52 servo drive family. It is a high-power servo drive integrated with native PROFINET IO interface, built to drive Atlas Copco low and medium torque electric servo nutrunners for precision bolt fastening. The suffix I stands for PROFINET industrial Ethernet, supporting seamless high-speed connection with Siemens PLC and other mainstream automation hosts. It delivers stronger continuous output than the standard TC52S-I and can handle heavier cyclic fastening loads on automated production lines. Operators can configure torque, angle, rotation speed and multi-step tightening sequences via dedicated Atlas Copco configuration software. Each fastening cycle is fully logged and stored locally to guarantee complete production traceability for quality audits and process tracking. It adopts compact cabinet mounting, occupying limited cabinet space and suitable for manual assembly stations, robotic fastening cells and small fixtured multi-spindle stations. It integrates comprehensive hardware protection including over current, over voltage, short circuit and over temperature protection to safeguard the drive and connected tightening tool under long continuous operation. Besides PROFINET IO, it provides isolated digital I/O terminals for tool trigger, ready status and fault handshake signals. It is widely favored for automotive powertrain parts, heavy electronic assemblies and general machinery production that requires high power output and stable PROFINET networking.

Basic Parameters

1. Compatible tools: low and medium torque Atlas Copco servo electric nutrunners matching TC52 series

2. Max stored programs: configurable via software

3. Input voltage: 200‑480V AC, three phase, 50/60Hz

4. Power consumption: high compact capacity for medium load fastening tools

5. Mounting method: cabinet mounting

6. Communication: PROFINET IO, isolated digital input and output terminals

7. License levels: Standard Supported Tightening Strategies

8. Torque control with angle monitoring

9. Angle control with torque supervision

10. Dynatork prevailing torque compensation

11. Yield point detection

12. Fastener seating control Core Functions

13. Batch counting and Poka-Yoke error proofing

14. Statistical process value recording

15. Complete tightening data storage: torque, angle, timestamp, batch ID, tool serial number, OK/NOK result

16. LED fault indication for quick on-site troubleshooting

17. PROFINET connection for remote program download, trigger control and real-time result feedback Hardware Specifications & Environmental Features

18. Built-in EMC filter and surge suppression circuit

19. Operating ambient temperature: 0°C ~ +45°C

20. Protection grade: IP20

21. I means integrated PROFINET IO industrial Ethernet interface

22. Status: Discontinued original model, available as replacement spare part Test items before shipment

23. Power supply circuit test

24. Servo drive and tool communication test

25. PROFINET communication test

26. Digital I/O signal handshake test

27. Overload protection function test

28. Firmware compatibility verification

Industry Applications: Applied in petrochemical auxiliary skids, gas flow control systems, boiler closed-loop control rooms and water treatment facilities for conventional analog signal acquisition and valve regulating output.

Note: Confirm SAM combined I/O feature and hardware revision before ordering

This is from our current stock.

available stock.xlsx