Product Details:

ATLAS COPCO TC52P-D-DECTLM is a high-power digital servo drive from the TC52 family, integrating enhanced digital signal processing and dedicated DECTLM communication interface for Atlas Copco low and medium torque servo electric nutrunners. It combines the high power output of TC52P, fast digital closed-loop control of the D variant and the dedicated DECTLM link for reliable point-to-point communication with host controllers. Users can define torque, angle, speed and tightening sequence parameters through Atlas Copco dedicated configuration software. All fastening cycles are locally recorded and stored, supporting complete traceability for quality audit and production tracking. It adopts compact cabinet mounting, saving valuable space inside control cabinets and widely deployed on manual assembly stations, robotic fastening cells and small fixtured multi-spindle stations. Built-in multi-layer protection including over current, over voltage, short circuit and over temperature protection safeguards both the drive and connected nutrunner under continuous cyclic loads. It transmits fastening results and accepts trigger commands via the DECTLM port, while high-speed isolated digital I/O terminals are reserved for ready status and fault handshake signals. It is widely selected for automotive parts, electronics and general machinery assembly that requires both high-speed digital regulation and dedicated DECTLM communication.

Basic Parameters

1. Compatible tools: low and medium torque Atlas Copco servo electric nutrunners matching TC52 drive series

2. Max stored programs: configurable via software

3. Input voltage: 200‑480V AC, three phase, 50/60Hz

4. Power consumption: high compact capacity for medium load fastening tools

5. Mounting method: cabinet mounting

6. Communication: DECTLM interface, high speed isolated digital input and output terminals

7. License levels: Standard Supported Tightening Strategies

8. Torque control with angle monitoring

9. Angle control with torque supervision

10. Dynatork prevailing torque compensation

11. Yield point detection

12. Fastener seating control Core Functions

13. Batch counting and Poka-Yoke error proofing

14. Statistical process value recording

15. Complete tightening data storage: torque, angle, timestamp, batch ID, tool serial number, OK/NOK result

16. LED fault indication for quick on-site troubleshooting

17. DECTLM and digital interface connection for remote program download, trigger control and real-time result feedback Hardware Specifications & Environmental Features

18. Built-in EMC filter and surge suppression circuit

19. Operating ambient temperature: 0°C ~ +45°C

20. Protection grade: IP20

21. D stands for digital processing, DECTLM refers to dedicated communication link

22. Status: Discontinued original model, available as replacement spare part Test items before shipment

23. Power supply circuit test

24. Servo drive and tool communication test

25. DECTLM interface communication test

26. High speed digital I/O handshake test

27. Overload protection function test

28. Firmware compatibility verification

Industry Applications: Applied in petrochemical auxiliary skids, gas flow control systems, boiler closed-loop control rooms and water treatment facilities for conventional analog signal acquisition and valve regulating output.

Note: Confirm SAM combined I/O feature and hardware revision before ordering

This is from our current stock.

available stock.xlsx