Product Details:

ATLAS COPCO PF4002-C-HU belongs to the Power Focus 4002 series, it is a compact single-channel tightening controller dedicated for Tensor SL electric nutrunners. The letter C stands for compact variant without built-in display and keypad, and HU marks the specific hardware revision. All tightening program setup, parameter adjustment, data backup and fault diagnosis have to be completed remotely via ToolsTalk PF software on external PC. This controller delivers stable and repeatable low to medium torque output, and it is widely used for small component fastening tasks. It is equipped with serial port and isolated digital I/O terminals for simple signal interlock with PLC and automation equipment. It is an ideal choice for automated assembly stations that do not require frequent local manual operation and demand reliable fastening traceability.

Basic Parameters

1. Compatible tools: Tensor SL series electric nutrunners

2. Max stored programs: 128 sets

3. Input voltage: 100‑120V / 200‑240V AC, 50/60Hz

4. Power consumption: 260W

5. Mounting method: 19 inch cabinet mounting

6. Communication: serial port, isolated digital input and output terminals

7. License levels: Bronze, Silver, Gold Supported Tightening Strategies

8. Torque control with angle monitoring

9. Angle control with torque supervision

10. Dynatork prevailing torque compensation

11. Yield point detection

12. Fastener seating control Core Functions

13. Batch counting and Poka-Yoke error proofing

14. Statistical process value recording

15. Complete tightening data storage: torque, angle, timestamp, batch ID, tool serial number, OK/NOK result

16. Remote parameter configuration and fault alarm reading

17. Digital I/O signal for tool trigger, station interlock and real-time status feedback Hardware Specifications & Environmental Features

18. Built-in EMC filter and surge suppression circuit

19. Operating ambient temperature: 0°C ~ +45°C

20. Protection grade: IP20 for controller cabinet

21. HU represents the designated hardware revision without optional fieldbus card

22. Status: Discontinued original model, available as replacement spare part Test items before shipment

23. Tool communication test

24. Serial port and digital I/O signal test

25. Tightening function test

26. Firmware compatibility verification

Industry Applications: Applied in petrochemical auxiliary skids, gas flow control systems, boiler closed-loop control rooms and water treatment facilities for conventional analog signal acquisition and valve regulating output.

Note: Confirm SAM combined I/O feature and hardware revision before ordering

This is from our current stock.

available stock.xlsx