Product Details:

ATLAS COPCO PF3109-G-DN-HW belongs to the Power Focus 3100 series, it is a heavy-duty single-channel graphic tightening controller for Tensor 8‑9 nutrunner tools. G stands for graphic version fitted with integrated LCD display and physical keypad, DN means built‑in DeviceNet communication board, and HW represents the standard hardware revision. Operators can create tightening sequences, view real‑time torque and angle curves, check batch results and read fault codes directly on the front panel. Remote configuration, data backup and diagnostic access can be carried out through ToolsTalk PF software. This unit is designed for high‑torque fastening tasks and offers stable and repeatable tightening accuracy. The integrated DeviceNet interface supports seamless data communication with Rockwell PLC and upper automation hosts, which is ideal for heavy assembly lines requiring both local manual operation and fieldbus interconnection.

Basic Parameter:

1. Compatible tools: Tensor 3, Tensor 8‑9 series electric nutrunners

2. Max stored programs: 128 sets

3. Input voltage: 100‑120V / 200‑240V AC, 50/60Hz

4. Power consumption: 300W

5. Mounting method: 19 inch cabinet mounting

6. Communication: DeviceNet, serial port, isolated digital input and output terminals

7. License levels: Standard, Advanced Supported Tightening Strategies

8. Torque control with angle monitoring

9. Angle control with torque supervision

10. Dynatork prevailing torque compensation

11. Yield point detection

12. Fastener seating control Core Functions

13. Batch counting and Poka‑Yoke error proofing

14. Continuous statistical process value recording

15. Complete tightening data storage: torque, angle, timestamp, batch ID, tool serial number, OK/NOK result

16. Local curve display and fault code inquiry

17. DeviceNet bus connection for remote program download, trigger control and real‑time result feedback Hardware Specifications & Environmental Features

18. Built‑in EMC filter and surge suppression circuit

19. Operating ambient temperature: 0°C ~ +45°C

20. Protection grade: IP20 for controller cabinet

21. HW suffix indicates standard hardware revision with onboard DeviceNet card

22. Status: Discontinued original model, available as replacement spare part Test items before shipment

23. Tool communication test

24. DeviceNet bus communication test

25. Tightening function test

26. Display and keypad function test

27. Firmware compatibility verification

Industry Applications: Applied in petrochemical auxiliary skids, gas flow control systems, boiler closed-loop control rooms and water treatment facilities for conventional analog signal acquisition and valve regulating output.

Note: Confirm SAM combined I/O feature and hardware revision before ordering

This is from our current stock.

available stock.xlsx