Product Details:

ATLAS COPCO PF3009-F-DN-HW belongs to the Power Focus 3009 series, it is a single-channel industrial tightening controller. F stands for fieldbus ready variant, DN means integrated DeviceNet communication board, and HW refers to the standard hardware revision. This model does not carry the front graphic HMI and keypad. All tightening program editing, parameter adjustment, data backup and fault diagnosis need to be completed remotely via ToolsTalk PF software on external PC. It supports Tensor 3 and Tensor S9 series electric nutrunners and provides stable high-precision fastening control. The built-in DeviceNet channel supports reliable bidirectional data exchange with Rockwell PLC and upper automation hosts. It is widely adopted on automated assembly lines that rely on fieldbus communication and do not require frequent local manual operation.

Basic Parameters:

1. Compatible tools: Tensor 3, Tensor S9 series electric nutrunners

2. Max stored programs: 128 sets

3. Input voltage: 100‑120V / 200‑240V AC, 50/60Hz

4. Power consumption: 240W

5. Mounting method: 19 inch cabinet mounting

6. Communication: DeviceNet, serial port, isolated digital input and output terminals

7. License levels: Standard, Advanced Supported Tightening Strategies

8. Torque control with angle monitoring

9. Angle control with torque supervision

10. Dynatork prevailing torque compensation

11. Yield point detection

12. Fastener seating control Core Functions

13. Batch counting and Poka-Yoke error proofing

14. Statistical process value recording

15. Complete tightening data storage: torque, angle, timestamp, batch ID, tool serial number, OK/NOK result

16. Support RBU rapid backup unit for fast program recovery

17. DeviceNet bus connection for remote program download, trigger control and real-time result feedback Hardware Specifications & Environmental Features

18. Built-in EMC filter and surge suppression circuit

19. Operating ambient temperature: 0°C ~ +45°C

20. Protection grade: IP20 for controller cabinet

21. HW suffix indicates standard hardware revision with onboard DeviceNet card

22. Status: Discontinued original model, available as replacement spare part Test items before shipment

23. Tool communication test

24. DeviceNet bus communication test

25. Tightening function test

26. Firmware compatibility verification

Industry Applications: Applied in petrochemical auxiliary skids, gas flow control systems, boiler closed-loop control rooms and water treatment facilities for conventional analog signal acquisition and valve regulating output.

Note: Confirm SAM combined I/O feature and hardware revision before ordering

This is from our current stock.

available stock.xlsx