Product Details:

ATLAS COPCO PF3120SS4S7 belongs to the Power Focus 3120 series, it is a single-channel compact tightening controller without local graphic display and keypad. SS4 represents the hardware configuration variant and S7 stands for the designated firmware revision. All tightening program creation, parameter calibration, data backup and fault troubleshooting must be operated remotely through ToolsTalk PF software on external PC. This unit matches Tensor 3 series electric nutrunners and delivers stable, repeatable high-precision fastening output. It is equipped with serial communication port and isolated digital I/O terminals for signal interlock with PLC and automation systems. It is well suited for automated fastening lines that pursue steady process control and do not require frequent local manual operation.

Basic Parameters:

1. Compatible tools: Tensor 3 series electric nutrunners

2. Max stored programs: 128 sets

3. Input voltage: 100‑120V / 200‑240V AC, 50/60Hz

4. Power consumption: 240W

5. Mounting method: 19 inch cabinet mounting

6. Communication: serial port, isolated digital input and output terminals

7. License levels: Standard, Advanced Supported Tightening Strategies

8. Torque control with angle monitoring

9. Angle control with torque supervision

10. Dynatork prevailing torque compensation

11. Yield point detection

12. Fastener seating control Core Functions

13. Batch counting and Poka-Yoke error proofing

14. Statistical process value continuous recording

15. Complete tightening data storage: torque, angle, timestamp, batch ID, tool serial number, OK/NOK result

16. Remote parameter configuration and fault code reading

17. Digital I/O signal for tool trigger, station interlock and real-time status feedback Hardware Specifications & Environmental Features

18. Built-in EMC filter and surge suppression circuit

19. Operating ambient temperature: 0°C ~ +45°C

20. Protection grade: IP20 for controller cabinet

21. SS4 is hardware variant code, S7 indicates fixed software revision

22. Status: Discontinued original model, available as replacement spare part Test items before shipment

23. Tool communication test

24. Serial port and digital I/O signal test

25. Tightening function test

26. Firmware compatibility verification

Industry Applications: Applied in petrochemical auxiliary skids, gas flow control systems, boiler closed-loop control rooms and water treatment facilities for conventional analog signal acquisition and valve regulating output.

Note: Confirm SAM combined I/O feature and hardware revision before ordering

This is from our current stock.

available stock.xlsx