Product Details:

ATLAS COPCO PF3102-C-EIP-HW belongs to the Power Focus 3100 family. It is a compact single‑channel tightening controller without local graphic display and keypad. C means compact version, EIP stands for integrated EtherNet/IP communication interface, and HW denotes standard hardware revision. All tightening program setup, parameter calibration, data backup and fault diagnosis have to be finished remotely via ToolsTalk PF software on external PC. This controller works with Tensor 3 series electric nutrunners and delivers repeatable high‑precision fastening output. The built‑in EtherNet/IP port supports high‑speed bidirectional data exchange with Rockwell PLC and upper MES systems. It is designed for automated assembly lines that adopt industrial Ethernet interconnection and do not require frequent local manual operation.

Basic Parameters

1. Compatible tools: Tensor 3 series electric nutrunners

2. Max stored programs: 128 sets

3. Input voltage: 100‑120V / 200‑240V AC, 50/60Hz

4. Power consumption: 240W

5. Mounting method: 19 inch cabinet mounting

6. Communication: EtherNet/IP, serial port, isolated digital input and output terminals

7. License levels: Standard, Advanced Supported Tightening Strategies

8. Torque control with angle monitoring

9. Angle control with torque supervision

10. Dynatork prevailing torque compensation

11. Yield point detection

12. Fastener seating control Core Functions

13. Batch counting and Poka‑Yoke error proofing

14. Continuous statistical process value recording

15. Complete tightening data storage: torque, angle, timestamp, batch ID, tool serial number, OK/NOK result

16. Remote parameter configuration and fault code reading

17. EtherNet/IP connection for remote program download, trigger control and real‑time result feedback Hardware Specifications & Environmental Features

18. Built‑in EMC filter and surge suppression circuit

19. Operating ambient temperature: 0°C ~ +45°C

20. Protection grade: IP20 for controller cabinet

21. HW suffix indicates standard hardware revision with onboard EtherNet/IP card

22. Status: Discontinued original model, available as replacement spare part Test items before shipment

23. Tool communication test

24. EtherNet/IP communication test

25. Tightening function test

26. Firmware compatibility verification

Industry Applications: Applied in petrochemical auxiliary skids, gas flow control systems, boiler closed-loop control rooms and water treatment facilities for conventional analog signal acquisition and valve regulating output.

Note: Confirm SAM combined I/O feature and hardware revision before ordering

This is from our current stock.

available stock.xlsx