Product Details:

ATLAS COPCO PF4002-C-DN-HW belongs to the Power Focus 4002 SL series. It is a compact single-channel tightening controller without built-in graphic display and keypad. C stands for compact base unit, DN means integrated DeviceNet communication board, and HW denotes standard hardware revision. All tightening program creation, torque and angle parameter setting, data backup and fault diagnosis must be completed remotely via ToolsTalk PF software on external PC. This controller is designed exclusively for Tensor SL electric nutrunners and delivers stable, repeatable precision fastening output for low and medium torque assembly applications. The onboard DeviceNet interface supports high-speed bidirectional data communication with Rockwell PLC and upper MES systems, supporting remote program download, real-time tightening result upload and full process traceability. It can capture complete tightening curves and supports multiple standard tightening strategies to keep consistent assembly quality. It also carries serial port and isolated digital I/O terminals for auxiliary signal interlock with automation devices. It is suitable for automated fastening lines adopting DeviceNet fieldbus and without frequent local manual operation requirements.

Basic Parameters

1. Compatible tools: Tensor SL series electric nutrunners

2. Max stored programs: 128 sets

3. Input voltage: 100‑120V / 200‑240V AC, 50/60Hz

4. Power consumption: 260W

5. Mounting method: 19 inch cabinet mounting

6. Communication: DeviceNet, serial port, isolated digital input and output terminals

7. License levels: Bronze, Silver, Gold Supported Tightening Strategies

8. Torque control with angle monitoring

9. Angle control with torque supervision

10. Dynatork prevailing torque compensation

11. Yield point detection

12. Fastener seating control Core Functions

13. Batch counting and Poka-Yoke error proofing

14. Statistical process value recording

15. Complete tightening data storage: torque, angle, timestamp, batch ID, tool serial number, OK/NOK result

16. Remote parameter configuration and fault alarm reading

17. DeviceNet bus connection for remote program download, trigger control and real-time result feedback Hardware Specifications & Environmental Features

18. Built-in EMC filter and surge suppression circuit

19. Operating ambient temperature: 0°C ~ +45°C

20. Protection grade: IP20 for controller cabinet

21. HW suffix indicates standard hardware revision with integrated DeviceNet card

22. Status: Discontinued original model, available as replacement spare part Test items before shipment

23. Tool communication test

24. DeviceNet bus communication test

25. Tightening function test

26. Firmware compatibility verification

Industry Applications: Applied in petrochemical auxiliary skids, gas flow control systems, boiler closed-loop control rooms and water treatment facilities for conventional analog signal acquisition and valve regulating output.

Note: Confirm SAM combined I/O feature and hardware revision before ordering

This is from our current stock.

available stock.xlsx