Product Details:

ATLAS COPCO PF-3110S-S4/7 belongs to the Power Focus 3100 series. It is a compact single-channel tightening controller without built-in graphic display and keypad. The marking S4/7 indicates it supports Tensor S4 and Tensor S7 electric nutrunners. All tightening program creation, torque and angle parameter setup, data backup and fault diagnosis have to be carried out remotely via ToolsTalk PF software on external PC. This drive unit provides steady and repeatable precision fastening control for medium torque assembly processes. It captures complete tightening curves and supports multiple standard tightening strategies to guarantee consistent assembly quality. It is equipped with serial communication port and isolated digital I/O terminals for signal interlock with PLC and other automation equipment. It fits automated fastening production lines that do not require frequent local manual operation and demand reliable full tightening traceability.

Basic Parameters

1. Compatible tools: Tensor S4, Tensor S7 series electric nutrunners

2. Max stored programs: 128 sets

3. Input voltage: 100‑120V / 200‑240V AC, 50/60Hz

4. Power consumption: 200W

5. Mounting method: 19 inch cabinet mounting

6. Communication: serial port, isolated digital input and output terminals

7. License levels: Standard, Advanced Supported Tightening Strategies

8. Torque control with angle monitoring

9. Angle control with torque supervision

10. Dynatork prevailing torque compensation

11. Yield point detection

12. Fastener seating control Core Functions

13. Batch counting and Poka-Yoke error proofing

14. Statistical process value recording

15. Complete tightening data storage: torque, angle, timestamp, batch ID, tool serial number, OK/NOK result

16. Support RBU rapid backup unit for fast program recovery

17. Digital I/O signal for tool trigger, station interlock and real-time status feedback Hardware Specifications & Environmental Features

18. Built-in EMC filter and surge suppression circuit

19. Operating ambient temperature: 0°C ~ +45°C

20. Protection grade: IP20 for controller cabinet

21. S4/7 stands for compatible tool variant code

22. Status: Discontinued original model, available as replacement spare part Test items before shipment

23. Tool communication test

24. Serial port and digital I/O signal test

25. Tightening function test

26. Firmware compatibility verification

Industry Applications: Applied in petrochemical auxiliary skids, gas flow control systems, boiler closed-loop control rooms and water treatment facilities for conventional analog signal acquisition and valve regulating output.

Note: Confirm SAM combined I/O feature and hardware revision before ordering

This is from our current stock.

available stock.xlsx