Product Details:

ATLAS COPCO PF2101S7-2 belongs to the Power Focus 2000 series. It is an entry-level single-channel compact tightening controller without onboard display and keypad. S7 represents the fixed firmware revision, and the suffix 2 stands for the designated hardware variant. All tightening program setup, parameter calibration, data backup and fault diagnosis must be completed remotely through the supporting configuration software on external PC. This lightweight controller is designed for small low-torque electric nutrunners, delivering stable and repeatable fastening results for delicate component assembly. It is equipped with serial communication port and isolated digital I/O terminals for simple signal interlock with PLC and automation equipment. It is widely used on compact automated assembly stations that do not require frequent local manual operation and demand reliable tightening traceability.

Basic Parameters:

1. Compatible tools: small low torque Atlas Copco electric nutrunners

2. Max stored programs: 64 sets

3. Input voltage: 100‑120V / 200‑240V AC, 50/60Hz

4. Power consumption: 150W

5. Mounting method: cabinet mounting

6. Communication: serial port, isolated digital input and output terminals

7. License levels: Standard Supported Tightening Strategies

8. Torque control with angle monitoring

9. Angle control with torque supervision

10. Dynatork prevailing torque compensation

11. Yield point detection

12. Fastener seating control Core Functions

13. Batch counting and Poka-Yoke error proofing

14. Statistical process value recording

15. Complete tightening data storage: torque, angle, timestamp, batch ID, tool serial number, OK/NOK result

16. Remote parameter setting and fault code reading

17. Digital I/O signal for tool trigger, station interlock and real-time status feedback Hardware Specifications & Environmental Features

18. Built-in EMC filter and surge suppression circuit

19. Operating ambient temperature: 0°C ~ +45°C

20. Protection grade: IP20 for controller housing

21. S7 is firmware version, suffix 2 indicates special hardware variant

22. Status: Discontinued original model, available as replacement spare part Test items before shipment

23. Tool communication test

24. Serial port and digital I/O signal test

25. Tightening function test

26. Firmware compatibility verification

Industry Applications: Applied in petrochemical auxiliary skids, gas flow control systems, boiler closed-loop control rooms and water treatment facilities for conventional analog signal acquisition and valve regulating output.

Note: Confirm SAM combined I/O feature and hardware revision before ordering

This is from our current stock.

available stock.xlsx