Product Details:

ATLAS COPCO PF3009-G-HW belongs to the Power Focus 3000 series, it is a single-channel graphic HMI tightening controller. The letter G denotes the graphic version fitted with built-in LCD display and physical keypad, while HW marks the standard hardware revision without optional fieldbus card. Operators can set tightening programs, view real-time torque and angle curves, check batch results and read fault codes directly on the front panel without a PC. Remote configuration and data backup are also supported through ToolsTalk PF software. This controller is compatible with Tensor 3 series electric nutrunners and delivers reliable high-precision fastening control. It is widely deployed on assembly stations requiring frequent local operation and visual process monitoring.

Basic Parameters:

1. Compatible tools: Tensor 3 series electric nutrunners

2. Max stored programs: 128 sets

3. Input voltage: 100‑120V / 200‑240V AC, 50/60Hz

4. Power consumption: 240W

5. Mounting method: 19 inch cabinet mounting

6. Communication: serial port, isolated digital input and output terminals

7. License levels: Standard, Advanced Supported Tightening Strategies

8. Torque control with angle monitoring

9. Angle control with torque supervision

10. Dynatork prevailing torque compensation

11. Yield point detection

12. Fastener seating control Core Functions

13. Batch counting and Poka-Yoke error proofing

14. Statistical process value recording

15. Complete tightening data storage: torque, angle, timestamp, batch ID, tool serial number, OK/NOK result

16. Local curve display and alarm code inquiry

17. Digital I/O signal for tool trigger, station interlock and status feedback Hardware Specifications & Environmental Features

18. Built-in EMC filter and surge suppression circuit

19. Operating ambient temperature: 0°C ~ +45°C

20. Protection grade: IP20 for controller cabinet

21. HW suffix stands for standard hardware revision without bus board

22. Status: Discontinued original model, available as replacement spare part Test items before shipment

23. Tool communication test

24. Serial port and digital I/O signal test

25. Tightening function test

26. Display and keypad function test

27. Firmware compatibility verification

Industry Applications: Applied in petrochemical auxiliary skids, gas flow control systems, boiler closed-loop control rooms and water treatment facilities for conventional analog signal acquisition and valve regulating output.

Note: Confirm SAM combined I/O feature and hardware revision before ordering

This is from our current stock.

available stock.xlsx