Product Details:

ATLAS COPCO PF3107-C-HW belongs to the Power Focus 3100 series, it is a compact single-channel industrial tightening controller without local graphic display and operation keypad. The letter C stands for compact version and HW represents the designated hardware revision. This base variant is equipped with serial communication and isolated digital I/O without extra fieldbus board. All tightening program setup, parameter adjustment, data backup and fault diagnosis have to be carried out remotely via ToolsTalk PF configuration software on external PC. It supports Tensor 3 series electric nutrunners and delivers stable high-precision fastening control for standard automated assembly stations, suitable for production lines that adopt digital signal interlock and do not require frequent local manual operation.

Basic Parameters:

1. Compatible tools: Tensor 3 series electric nutrunners

2. Max stored programs: 128 sets

3. Input voltage: 100‑120V / 200‑240V AC, 50/60Hz

4. Power consumption: 240W

5. Mounting method: 19 inch cabinet mounting

6. Communication: serial port, isolated digital input and output terminals

7. License levels: Standard, Advanced Supported Tightening Strategies

8. Torque control with angle monitoring

9. Angle control with torque supervision

10. Dynatork prevailing torque compensation

11. Yield point detection

12. Fastener seating control Core Functions

13. Batch counting and Poka-Yoke error proofing

14. Statistical process value recording

15. Complete tightening data storage: torque, angle, timestamp, batch ID, tool serial number, OK/NOK result

16. Support RBU rapid backup unit for fast program recovery

17. Digital I/O signal for tool start trigger, station interlock and real-time status feedback Hardware Specifications & Environmental Features

18. Built-in EMC filter and surge suppression circuit

19. Operating ambient temperature: 0°C ~ +45°C

20. Protection grade: IP20 for controller cabinet

21. HW suffix indicates standard hardware revision without bus option

22. Status: Discontinued original model, available as replacement spare part Test items before shipment

23. Tool communication test

24. Serial port and digital I/O signal test

25. Tightening function test

26. Firmware compatibility verification

Industry Applications: Applied in petrochemical auxiliary skids, gas flow control systems, boiler closed-loop control rooms and water treatment facilities for conventional analog signal acquisition and valve regulating output.

Note: Confirm SAM combined I/O feature and hardware revision before ordering

This is from our current stock.

available stock.xlsx