Product Details:

ATLAS COPCO PF4000-G-DN-HW belongs to the classic Power Focus 4000 series, it is a single-channel graphic tightening controller equipped with built-in LCD display and keypad. The letter G stands for graphic local operation version, DN means integrated DeviceNet communication board, and HW refers to standard hardware revision. Operators can create tightening programs, observe real-time torque-angle curves, check batch results and retrieve fault alarms directly on the front panel. Remote parameter configuration, data backup and diagnostic access can be realized through ToolsTalk PF software. This unit supports Tensor ST, Tensor SR, ETX and DS series electric nutrunners, and provides stable high-precision fastening control. The DeviceNet interface enables seamless data exchange with Rockwell PLC and automation hosts, suitable for automated assembly lines requiring both local manual operation and fieldbus interconnection.

Basic Parameters

1. Compatible tools: Tensor ST, Tensor SR, ETX, DS series electric nutrunners

2. Max stored programs: 256 sets

3. Input voltage: 100‑120V / 200‑240V AC, 50/60Hz

4. Power consumption: 320W

5. Mounting method: 19 inch cabinet mounting

6. Communication: DeviceNet, serial port, isolated digital input and output terminals

7. License levels: Bronze, Silver, Gold Supported Tightening Strategies

8. Torque control with angle monitoring

9. Angle control with torque supervision

10. Dynatork prevailing torque compensation

11. Yield point detection

12. Fastener seating control Core Functions

13. Batch counting and Poka-Yoke error proofing

14. Continuous statistical process monitoring and quality analysis

15. Complete tightening data storage: torque, angle, timestamp, batch ID, tool serial number, OK/NOK result

16. Local curve display and fault code inquiry

17. DeviceNet bus connection for remote program download, trigger control and real-time result feedback Hardware Specifications & Environmental Features

18. Built-in EMC filter and surge suppression circuit

19. Operating ambient temperature: 0°C ~ +45°C

20. Protection grade: IP20 for controller cabinet

21. HW suffix represents standard hardware revision with integrated DeviceNet card

22. Status: Discontinued original model, available as replacement spare part Test items before shipment

23. Tool communication test

24. DeviceNet bus communication test

25. Tightening function test

26. Display and keypad function test

27. Firmware compatibility verification

Industry Applications: Applied in petrochemical auxiliary skids, gas flow control systems, boiler closed-loop control rooms and water treatment facilities for conventional analog signal acquisition and valve regulating output.

Note: Confirm SAM combined I/O feature and hardware revision before ordering

This is from our current stock.

available stock.xlsx