Product Details:

ATLAS COPCO PF4000-G-PN-HW belongs to the Power Focus 4000 series, it is a single-channel graphic HMI tightening controller integrated with native Profinet industrial Ethernet interface. The letter G represents graphic version equipped with built-in LCD display and full-function keypad. Operators can view torque curve, angle curve, batch counter, fastening result and fault codes directly on the local panel, and complete parameter adjustment, program editing and on-site diagnosis without connecting external PC software. PN stands for Profinet communication board, which supports stable data exchange with Siemens PLC and upper automation control systems.

Basic Parameters

1. Compatible tools: Tensor S, Tensor ST, ETX, DS series electric nutrunners

2. Max stored programs: 256 sets

3. Input voltage: 100‑120V / 200‑240V AC, 50/60Hz

4. Power consumption: 320W

5. Mounting method: 19 inch cabinet mounting

6. Communication: Profinet IO, isolated digital input and output terminals

7. License levels: Bronze, Silver, Gold Supported Tightening Strategies

8. Torque control with angle monitoring

9. Angle control with torque supervision

10. Dynatork prevailing torque compensation

11. Yield point detection

12. Fastener seating control Core Functions

13. Batch counting and Poka-Yoke error proofing

14. Statistical process monitoring

15. Complete tightening data storage: torque, angle, timestamp, batch ID, tool serial number, OK/NOK result

16. Local curve display and alarm code inquiry

17. Profinet bus connection for remote program selection, trigger start and fastening result feedback

18. Support RBU rapid backup unit for fast program recovery Hardware Specifications & Environmental Features

19. Built-in EMC filter and surge suppression circuit

20. Operating ambient temperature: 0°C ~ +45°C

21. Protection grade: IP20 for controller cabinet

22. HW suffix: specific hardware revision with Profinet communication board

23. Status: Discontinued original model, available as replacement spare part Test items before shipment

24. Tool communication test

25. Profinet bus test

26. Tightening function test

27. Curve display inspection

28. Firmware compatibility verification

Industry Applications: Applied in petrochemical auxiliary skids, gas flow control systems, boiler closed-loop control rooms and water treatment facilities for conventional analog signal acquisition and valve regulating output.

Note: Confirm SAM combined I/O feature and hardware revision before ordering

This is from our current stock.

available stock.xlsx