Product Details:

ATLAS COPCO PF3007-F-DN-HW belongs to the Power Focus 3000 series, it is an enhanced single-channel tightening controller integrated with native DeviceNet fieldbus interface. The letter F stands for enhanced version with expanded algorithm and advanced tightening functions. This variant does not carry local graphic display and operation keypad. All tightening program setup, parameter adjustment, function configuration, data backup and equipment fault diagnosis need to be completed remotely via the official ToolsTalk PF configuration software on external PC. DN represents the built-in DeviceNet communication board, supporting reliable data exchange with Rockwell PLC and upper automation hosts. It is designed for high-demanding automated bolt fastening stations that require advanced fastening strategies and bus control.

Basic Parameters:

1. Compatible tools: Tensor 3 series electric nutrunners

2. Max stored programs: 128 sets

3. Input voltage: 100‑120V / 200‑240V AC, 50/60Hz

4. Power consumption: 240W

5. Mounting method: 19 inch cabinet mounting

6. Communication: DeviceNet, isolated digital input and output terminals

7. License levels: Standard, Advanced Supported Tightening Strategies

8. Torque control with angle monitoring

9. Angle control with torque supervision

10. Dynatork prevailing torque compensation

11. Yield point detection

12. Fastener seating control Core Functions

13. Batch counting and Poka-Yoke error proofing

14. Statistical process value recording

15. Complete tightening data storage: torque, angle, timestamp, batch ID, tool serial number, OK/NOK result

16. Support RBU rapid backup unit for fast program recovery

17. DeviceNet bus connection for remote program selection, trigger start and fastening result feedback Hardware Specifications & Environmental Features

18. Built-in EMC filter and surge suppression circuit

19. Operating ambient temperature: 0°C ~ +45°C

20. Protection grade: IP20 for controller cabinet

21. HW suffix: specific hardware revision with DeviceNet communication board

22. Status: Discontinued original model, available as replacement spare part Test items before shipment

23. Tool communication test

24. DeviceNet bus test

25. Tightening function test

26. Firmware compatibility verification

Industry Applications: Applied in petrochemical auxiliary skids, gas flow control systems, boiler closed-loop control rooms and water treatment facilities for conventional analog signal acquisition and valve regulating output.

Note: Confirm SAM combined I/O feature and hardware revision before ordering

This is from our current stock.

available stock.xlsx