Product Details:

ATLAS COPCO TC52S-N belongs to the TC52 servo drive family. It is a compact single-channel standard servo drive without fixed built-in fieldbus port, made to drive Atlas Copco low and medium torque electric servo nutrunners for precision bolt fastening. The suffix N stands for standard single channel configuration, leaving users the freedom to fit optional communication modules according to the site PLC architecture. Users can define torque, angle, rotational speed and multi-step tightening sequences via dedicated Atlas Copco configuration software. All fastening cycles are saved locally, supporting full traceability for quality audit and production tracking. It adopts cabinet mounting with small footprint, suitable for manual assembly stations, robotic fastening cells and small fixtured multi-spindle stations. It carries complete hardware protection including over current, over voltage, short circuit and over temperature protection to protect the drive and connected tightening tool under continuous cyclic load. Isolated digital I/O terminals are reserved for tool trigger, ready status and fault handshake signals. It is widely used in auto parts, electronics and general machinery assembly that needs compact single-channel fastening control and flexible communication expansion.

Basic Parameters

1. Compatible tools: low and medium torque Atlas Copco servo electric nutrunners matching TC52 series

2. Max stored programs: configurable via software

3. Input voltage: 200‑480V AC, three phase, 50/60Hz

4. Power consumption: compact capacity for low to medium torque fastening tools

5. Mounting method: cabinet mounting

6. Communication: optional industrial bus, isolated digital input and output terminals

7. License levels: Standard Supported Tightening Strategies

8. Torque control with angle monitoring

9. Angle control with torque supervision

10. Dynatork prevailing torque compensation

11. Yield point detection

12. Fastener seating control Core Functions

13. Batch counting and Poka-Yoke error proofing

14. Statistical process value recording

15. Complete tightening data storage: torque, angle, timestamp, batch ID, tool serial number, OK/NOK result

16. LED fault indication for quick on-site troubleshooting

17. Bus and digital interface connection for remote program download, trigger control and real-time result feedback Hardware Specifications & Environmental Features

18. Built-in EMC filter and surge suppression circuit

19. Operating ambient temperature: 0°C ~ +45°C

20. Protection grade: IP20

21. N means standard single channel compact version

22. Status: Discontinued original model, available as replacement spare part Test items before shipment

23. Power supply circuit test

24. Servo drive and tool communication test

25. Digital I/O signal handshake test

26. Overload protection function test

27. Firmware compatibility verification

Industry Applications: Applied in petrochemical auxiliary skids, gas flow control systems, boiler closed-loop control rooms and water treatment facilities for conventional analog signal acquisition and valve regulating output.

Note: Confirm SAM combined I/O feature and hardware revision before ordering

This is from our current stock.

available stock.xlsx