Product Details:

ATLAS COPCO PF4002-C-PN-HW belongs to the Power Focus 4002 series, it is a compact single-channel industrial tightening controller integrated with native Profinet industrial Ethernet interface. The letter C represents compact type without local graphic display panel and physical operation keypad. There is no local screen for parameter modification or curve viewing, all tightening program setup, parameter adjustment, function configuration, data backup and equipment fault diagnosis need to be completed remotely via the official ToolsTalk PF configuration software on external PC. This controller is specially designed for automated bolt fastening stations that rely on PLC bus control and do not require frequent on-site manual operation.

Basic Parameters

• Compatible tools: Tensor S, Tensor ST, ETX, DS series electric nutrunners

• Max stored programs: 256 sets

• Input voltage: 100‑120V / 200‑240V AC, 50/60Hz

• Power consumption: 320W

• Mounting method: 19 inch cabinet mounting

• Communication: Profinet IO, isolated digital input and output terminals

• License levels: Bronze, Silver, Gold

• Supported Tightening Strategies

• Torque control with angle monitoring

• Angle control with torque supervision

• Dynatork prevailing torque compensation

• Yield point detection

• Fastener seating control

• Core Functions

• Batch counting and Poka-Yoke error proofing

• Statistical process monitoring

• Complete tightening data storage: torque, angle, timestamp, batch ID, tool serial number, OK/NOK result

• Support RBU rapid backup unit for fast program recovery

• Profinet bus connection for remote program selection, trigger start and fastening result feedback

• Hardware Specifications & Environmental Features

• Built-in EMC filter and surge suppression circuit

• HW suffix: specific hardware revision with Profinet communication board

• Status: Discontinued original model, available as replacement spare part

• Test items before shipment: tool communication test, Profinet bus test, tightening function test, firmware compatibility verification

Industry Applications: Applied in petrochemical auxiliary skids, gas flow control systems, boiler closed-loop control rooms and water treatment facilities for conventional analog signal acquisition and valve regulating output.

Note: Confirm SAM combined I/O feature and hardware revision before ordering

This is from our current stock.

available stock.xlsx