Product Details:

ATLAS COPCO PF3107-G-IB-HW belongs to the Power Focus 3000 series, it is a single-channel graphic HMI tightening controller with internal bus interface. The letter G represents graphic version equipped with built-in LCD display and full-function keypad. Operators can view torque curve, angle curve, batch counter, fastening result and fault codes directly on the local panel, and complete parameter adjustment, program editing and on-site diagnosis without connecting external PC software. IB stands for internal bus interface variant, designed for dedicated communication connection with matched station control modules.

Basic Parameters

1. Compatible tools: Tensor 3 series electric nutrunners

2. Max stored programs: 128 sets

3. Input voltage: 100‑120V / 200‑240V AC, 50/60Hz

4. Power consumption: 240W

5. Mounting method: 19 inch cabinet mounting

6. Communication: Internal bus, isolated digital input and output terminals

7. License levels: Standard, Advanced Supported Tightening Strategies

8. Torque control with angle monitoring

9. Angle control with torque supervision

10. Dynatork prevailing torque compensation

11. Yield point detection

12. Fastener seating control Core Functions

13. Batch counting and Poka-Yoke error proofing

14. Statistical process value recording

15. Complete tightening data storage: torque, angle, timestamp, batch ID, tool serial number, OK/NOK result

16. Local curve display and alarm code inquiry

17. Internal bus communication for data exchange with station auxiliary modules Hardware Specifications & Environmental Features

18. Built-in EMC filter and surge suppression circuit

19. Operating ambient temperature: 0°C ~ +45°C

20. Protection grade: IP20 for controller cabinet

21. HW suffix: specific hardware revision with internal bus communication board

22. Status: Discontinued original model, available as replacement spare part Test items before shipment

23. Tool communication test

24. Internal bus communication test

25. Tightening function test

26. Curve display inspection

27. Firmware compatibility verification

Industry Applications: Applied in petrochemical auxiliary skids, gas flow control systems, boiler closed-loop control rooms and water treatment facilities for conventional analog signal acquisition and valve regulating output.

Note: Confirm SAM combined I/O feature and hardware revision before ordering

This is from our current stock.

available stock.xlsx