Product Details:

ATLAS COPCO PF3102-C-HW belongs to the Power Focus 3100 series, it is a compact two‑channel industrial tightening controller without local graphic display panel. The letter C stands for compact variant, there is no front LCD screen and physical keypad. All tightening program setup, parameter adjustment, function configuration, data backup and fault diagnosis must be finished remotely through the official ToolsTalk PF software on external PC. This unit supports two independent tightening channels, each channel can run separate tightening programs. It is designed for distributed automated bolt fastening lines with limited cabinet space, ideal for applications without frequent local manual operation.

Basic Parameters:

1. Compatible tools: Tensor SL, Tensor ST series electric nutrunners

2. Max stored programs: 128 sets

3. Input voltage: 100‑120V / 200‑240V AC, 50/60Hz

4. Power consumption: 240W

5. Mounting method: 19 inch cabinet mounting

6. Communication: isolated digital input and output terminals, serial port

7. License levels: Standard, Advanced Supported Tightening Strategies

8. Torque control with angle monitoring

9. Angle control with torque supervision

10. Dynatork prevailing torque compensation

11. Yield point detection

12. Fastener seating control Core Functions

13. Batch counting and Poka-Yoke error proofing for each channel

14. Statistical process value recording

15. Complete tightening data storage: torque, angle, timestamp, batch ID, tool serial number, OK/NOK result

16. Support RBU rapid backup unit for fast program recovery

17. Independent digital I/O for each channel for trigger, interlock and status feedback Hardware Specifications & Environmental Features

18. Built-in EMC filter and surge suppression circuit

19. Operating ambient temperature: 0°C ~ +45°C

20. Protection grade: IP20 for controller cabinet

21. HW suffix: specific hardware revision for two‑channel compact board

22. Status: Discontinued original model, available as replacement spare part Test items before shipment

23. Tool communication test for both channels

24. Digital I/O signal test

25. Tightening function test

26. Firmware compatibility verification

Industry Applications: Applied in petrochemical auxiliary skids, gas flow control systems, boiler closed-loop control rooms and water treatment facilities for conventional analog signal acquisition and valve regulating output.

Note: Confirm SAM combined I/O feature and hardware revision before ordering

This is from our current stock.

available stock.xlsx