Product Details:

KOLLMORGEN SR1030B62 is a rack-mounted single-axis servo amplifier within the SERVOSTAR SR10 series, rated continuous current 3A and peak current 6A. It adopts analog ±10V command input for speed and torque closed-loop control, designed to pair with Kollmorgen Goldline permanent magnet servo motors. It is widely deployed on small CNC feed axes, textile machinery, rotary indexing stations and compact packaging automation equipment, suitable for light-load motion control scenarios that require stable low-speed running and reliable anti-interference performance.

This servo amplifier supports resolver and incremental encoder feedback signals, delivering stable signal acquisition in dusty and oil mist workshop environments. It uses Eurocard rack mounting structure, with separated power studs and signal terminals for convenient shielded wiring and maintenance. It integrates built-in dynamic braking circuit and reserves interface for external brake resistor to handle heavy deceleration working conditions. Front panel LED indicators and fault relay output allow technicians to quickly check operating status and alarm information. RS232 service port is reserved for parameter tuning and firmware upgrade via Kollmorgen MotionLink software.

Professional technicians can adjust loop gain, current limit and braking threshold parameters according to different load characteristics. Internal monitoring circuits continuously sample DC bus voltage, output current and module temperature. Once overload, overheating, overvoltage or feedback signal loss is detected, the drive will rapidly disable output and trigger alarm signal to protect servo motor windings and feedback components. The hardware structure is vibration-resistant, adapting to long-cycle continuous operation of industrial automation equipment.

This KOLLMORGEN SR1030B62 servo amplifier has been discontinued by the original manufacturer. It is supplied as a tested aftermarket replacement spare part for legacy Goldline motion systems. Maintenance personnel can complete replacement safely after power cut, and the original motor interface and rack installation dimensions can be retained without large modification.

It is a classic low-current SR10 series servo drive spare part, frequently selected for maintenance and retrofit of old small automation and CNC equipment.

Key specifications：KOLLMORGEN SR1030B62 servo amplifier,3A continuous current,6A peak current,analog ±10V command,resolver and encoder support,built-in brake circuit,rack mounting. Operating temperature range: 0°C to +45°C. It undergoes power-on test, feedback signal inspection and load aging test before shipment.

This SR1030B62 servo amplifier can cooperate with Kollmorgen Goldline series servo motors to realize stable closed-loop speed and torque control.