Product Details:

KOLLMORGEN SR10201-000000 is a rack-mounted single-axis digital servo amplifier of the SERVOSTAR SR10 series. It adopts fully digital control architecture, standard resolver feedback interface, supporting analog ±10V command input for velocity and torque control. It is powered by 230VAC single-phase supply, with 10A continuous current and 20A peak current. It supports built-in auto-tuning function, multiple control algorithms and internal motion task storage for homing and indexing. It is widely matched with Kollmorgen Goldline permanent magnet servo motors and applied on CNC equipment, printing presses, rotary index tables and packaging automation lines, suitable for medium-load motion axes requiring stable low-speed operation and strong anti-interference performance.

This servo amplifier takes resolver as the main feedback component, which can maintain stable signal acquisition in dusty and oil mist workshop environments. It is equipped with RS232 service port for parameter setup, auto-tuning and firmware upgrade via Kollmorgen MotionLink software. Built-in dynamic braking circuit is integrated for energy dissipation during deceleration, and external brake resistor can be configured for frequent deceleration loads. Separated power terminals and resolver connectors facilitate shielded wiring. Onboard diagnostic and LED status indicators help technicians quickly locate faults such as overcurrent, overtemperature and feedback loss.

Professional technicians can adjust loop gain, current limit and motion parameters according to load characteristics. Internal monitoring circuits continuously sample DC bus voltage, output current and module temperature. Once overload, overheating, overvoltage or resolver signal interruption is detected, the drive will cut off power output and trigger alarm to protect servo motor windings and resolver components. The mechanical structure is robust and vibration-resistant, suitable for long-cycle continuous operation of industrial automation equipment.

This KOLLMORGEN SR10201-000000 servo amplifier has been discontinued by the original manufacturer. It is supplied as a tested aftermarket replacement spare part for legacy Goldline motion systems. Maintenance personnel can complete replacement safely after power cut, and the original motor interface and rack installation dimensions can be retained without large modification.

It is a standard SR10 series servo drive spare part, frequently selected for maintenance and retrofit of old CNC and automation equipment.

Key specifications：KOLLMORGEN SR10201-000000 servo amplifier,230VAC single phase input,10A continuous current,20A peak current,resolver feedback,digital control,RS232 port,built-in brake circuit,rack mounting. Operating temperature range: 0°C to +45°C. It undergoes power-on test, resolver signal inspection and load aging test before shipment.

This SR10201-000000 servo amplifier can cooperate with Kollmorgen Goldline series servo motors to realize stable closed-loop speed and torque control.