Product Details

The Delem DM-205 is an original rack-mounted multi-axis motion control module built for the Delem Modusys HSB bus system for CNC press brakes. This multi-axis motion control module communicates at high speed with Delem touch HMI controllers such as DA-58T, DA-66T and DA-65P, delivering closed-loop positioning control for multiple auxiliary axes including backgauge, crowning, sheet follower and Z-axis stops. As a reliable press brake expansion drive board, it accepts incremental encoder feedback and outputs analog command signals to servo drives, inverters and proportional hydraulic units. This Delem Modusys axis module is kept in stock as genuine spare hardware, widely deployed for upgrading and repairing multi-axis synchronous press brakes and tandem bending machine systems.

Basic Parameters

Brand: Delem

Model: DM-205

Type: Modusys HSB multi-axis motion control module

Bus interface: Delem HSB Modusys bus

Control supply: 24 VDC

Feedback: Incremental differential encoder input

Drive output: Analog command output for servo / inverter

Signal terminals: Opto-isolated digital I/O, enable and fault feedback ports

Mounting: Plug-in on Delem Modusys backplane

Compatible controllers: DA-63P, DA-65P, DA-58T, DA-66T and other DAonWindows series

Product type: Original Delem multi-axis motion spare module

Supported Functions

This multi-axis motion control module receives target position and motion profiles sent from the Delem main HMI. The press brake expansion drive board executes closed-loop position regulation for each configured axis and continuously reads encoder feedback to correct positioning deviation. It transmits real-time axis position, speed and diagnostic status back to the upper controller. This Delem Modusys axis module supports teach-in calibration, soft limit setting and fault signal locking for safe automatic bending cycles.

Core Functions

Synchronized motion logic coordinates several auxiliary axes to work together with the main ram axis to improve bending consistency. The multi-axis motion control module monitors encoder loss, bus communication dropout and drive fault signals, and triggers protective lockout once dangerous anomalies are detected. It expands the axis capacity of standard Delem control racks without replacing the main HMI. Its standardized connector definition and Modusys protocol support direct substitution for a faulty DM-205 unit without major rewiring.

Hardware Specifications & Environmental Features

Mounting: Plug-in installation on Delem Modusys control backplane

Operating temperature: 0 °C to +55 °C

Storage temperature: -20 °C to +70 °C

Relative humidity: 5% – 90%, non-condensing

PCB treatment: Conformal coating for dust and moisture resistance

Condition: Original new or fully tested refurbished Delem spare part

Industry Applications: Applied in legacy petrochemical distributed control, old paper making production automation, material handling conveyor lines, packaging and textile machinery, water treatment remote signal collection and large conveyor remote I/O control racks.

Note: Confirm 800 series backplane compatibility, pulse signal type, counting mode and preset logic before ordering.

This is from our current stock.

available stock.xlsx