Product Details

The Delem DA-24e is an original legacy numerical CNC operator panel for hydraulic press brakes, belonging to the older Delem DA24 series. This press brake CNC operator panel was originally equipped with a 12‑inch CRT display and can be retrofitted with a compatible 10.4‑inch TFT replacement screen. As a reliable legacy numerical control unit, it supports numerical programming for bending jobs and communicates with Delem axis control modules to complete positioning and motion regulation. This Delem HMI controller is widely stocked as an original replacement spare part for maintenance and retrofit of older sheet metal bending machines, restoring CNC operation for vintage press brake production lines.

Basic Parameters

Brand: Delem

Model: DA-24e

Type: Legacy press brake CNC operator HMI panel

Original display: 12 inch CRT, compatible with 10.4 inch TFT replacement

Resolution: 640 × 480

Keypad: Integrated membrane function and numeric keys

Communication: Proprietary Delem internal bus

Power supply: 24 VDC

Compatible module: Delem legacy motion control and I/O modules

Compatible machine: Older hydraulic CNC press brake

Product type: Original Delem legacy HMI spare controller

Supported Functions

This press brake CNC operator panel supports numerical part programming and storage of bending recipes. The legacy numerical control unit enables manual jog operation, single bending cycle and automatic sequential bending. It supports bend allowance setting, material parameter configuration and unit switching between inch and metric. This Delem HMI controller provides real‑time position readout, alarm message display and basic I/O status monitoring for on‑site commissioning and fault checking.

Core Functions

The operator panel sends motion commands and receives real‑time position feedback from the axis control modules. The press brake CNC operator panel stores tool data, product programs and material parameters, retaining data after power interruption. It processes operator input and converts program instructions into motion orders for the drive system. Built‑in diagnostic routines output fault codes on the screen to help technicians locate communication, encoder or I/O failures. Its original mounting and connector layout supports direct substitution for a faulty DA-24e panel.

Hardware Specifications & Environmental Features

Mounting: Panel cutout installation

Operation: Membrane keypad with industrial display

Operating temperature: 0 °C to +55 °C

Storage temperature: -20 °C to +70 °C

Relative humidity: 5% – 90%, non‑condensing

Front protection: IP54 against dust and splashing liquid

Condition: Original new or fully tested refurbished Delem spare part

Industry Applications: Applied in legacy petrochemical distributed control, old paper making production automation, material handling conveyor lines, packaging and textile machinery, water treatment remote signal collection and large conveyor remote I/O control racks.

Note: Confirm 800 series backplane compatibility, pulse signal type, counting mode and preset logic before ordering.

This is from our current stock.

available stock.xlsx