Product Details

The Fireye ZB110UVSC is a microprocessor-based BurnerLogix Z-series integrated burner management chassis, powered by 120 VAC and equipped with built-in UV self-check flame amplifier, the 120V counterpart of ZB230UVSC. This BurnerLogix burner management chassis executes certified burner safety sequencing together with PID boiler modulation control, supporting pre-purge, trial for ignition, continuous flame supervision and safe fuel shutoff for natural gas, propane, light fuel oil and dual-fuel burners. As a reliable 120V UV self-check flame amplifier, it automatically runs diagnostic self-check on the connected UV flame scanner in every firing cycle to detect sensor failure and prevent unsafe hidden faults. This Fireye boiler combustion controller is stocked as genuine replacement spare part, widely used for small and medium boilers, process heaters and packaged combustion systems with 120V power supply.

Basic Parameters

Brand: Fireye

Model: ZB110UVSC

Type: BurnerLogix Z chassis with UV self-check amplifier

Supply voltage: 120 VAC, 50 / 60 Hz

Power consumption: 25 VA

Flame input: Compatible with Fireye self-check UV flame scanners

Optional display modules: BLV512 VFD display, BLL510 LCD display

Plug-in programmer: YP series programmer modules

Supported fuels: Natural gas, propane, light fuel oil, dual fuel

Difference note: ZB110UVSC = 120V; ZB230UVSC = 230V version

Approvals: FM, CE certified

Communication: Modbus for remote monitoring and parameter access

Product type: Original Fireye burner management spare chassis

Supported Functions

This BurnerLogix burner management chassis runs the full automatic burner startup safety sequence and keeps continuous flame supervision during firing. The 120V UV self-check flame amplifier detects flame UV radiation and triggers immediate lockout and fuel cut-off once flame loss or scanner malfunction is confirmed. This Fireye boiler combustion controller offers PID modulation for pressure or temperature setpoint, cold-start thermal shock protection, lead-lag boiler control logic, password protection and fault history logging for on-site troubleshooting.

Core Functions

The integrated self-check UV amplifier verifies scanner integrity each firing cycle, eliminating undetected UV sensor faults that may bypass flame safeguard. The BurnerLogix burner management chassis coordinates blower, ignition transformer and fuel valve outputs following standard safety timing. Built-in modulation adjusts firing rate to stabilize boiler operating conditions. Its modular plug-in design supports direct drop-in substitution for a faulty ZB110UVSC with matching programmer and display accessories.

Hardware Specifications & Environmental Features

Mounting: DIN rail or panel chassis installation

Operating temperature: -40 °C to +60 °C

Storage temperature: -40 °C to +70 °C

Relative humidity: 5% – 90%, non-condensing

Enclosure rating: NEMA 1

Condition: Original new or fully tested refurbished Fireye spare part

Industry Applications: Applied in legacy petrochemical distributed control, old paper making production automation, material handling conveyor lines, packaging and textile machinery, water treatment remote signal collection and large conveyor remote I/O control racks.

Note: Confirm 800 series backplane compatibility, pulse signal type, counting mode and preset logic before ordering.

This is from our current stock.

available stock.xlsx