Product Details

The Fireye NX610 is an early-generation dedicated operator display HMI for the Fireye PPC6000 fuel-air ratio parallel positioning combustion controller, now classified as obsolete and superseded by NX6220, NX6330 and NXTSD touch displays. This obsolete operator display connects to the PPC6000 main unit for burner commissioning, parameter setting, flame status reading, modulation monitoring and fault log review. As a reliable burner control panel, it supports curve profile editing, servo calibration and local manual operation for gas and oil fired burners. This Fireye PPC6000 HMI is stocked as hard-to-find replacement spare, only compatible with older PPC6000 firmware versions and cannot work with newer 1.405 and above firmware releases.

Basic Parameters

Brand: Fireye

Model: NX610

Type: Obsolete local operator display panel

Compatible host: Fireye PPC6000 parallel positioning controller (old firmware)

Communication: Dedicated internal link for PPC6000

Function: Parameter setup, status monitoring, fault display, manual modulation

Supported fuels: Natural gas, light fuel oil, dual fuel burner systems

Replacement successor: NX6220, NX6330, NXTSD series

Product type: Original discontinued Fireye combustion HMI spare part

Supported Functions

This obsolete operator display provides local access to all core burner control parameters stored inside PPC6000. The burner control panel enables fuel-air curve programming, servo motor setup, pressure and temperature setpoint adjustment. It displays real-time flame signal, load modulation percentage and active fault codes for troubleshooting. This Fireye PPC6000 HMI supports manual override mode for on-site commissioning and routine burner inspection.

Core Functions

It acts as the human interface between technicians and the PPC6000 parallel positioning system, allowing adjustment of combustion profiles to optimize efficiency and low emissions. The obsolete operator display records and recalls historical fault events to assist in recurring failure diagnosis. Its dedicated communication protocol matches early PPC6000 hardware; direct drop-in swap is only valid for legacy systems running matching firmware. Once replaced by newer display models, system firmware upgrade is required.

Hardware Specifications & Environmental Features

Mounting: Panel cutout installation

Operating temperature: 0 °C to +50 °C

Storage temperature: -20 °C to +70 °C

Relative humidity: 5% – 90%, non-condensing

Enclosure: Industrial front panel, suitable for control cabinet installation

Condition: Original new or fully tested refurbished Fireye obsolete spare part

Industry Applications: Applied in legacy petrochemical distributed control, old paper making production automation, material handling conveyor lines, packaging and textile machinery, water treatment remote signal collection and large conveyor remote I/O control racks.

Note: Confirm 800 series backplane compatibility, pulse signal type, counting mode and preset logic before ordering.

This is from our current stock.

available stock.xlsx