Product Details

The Delem DM01 is the foundational original motion control module of the DM01 family, serving as the base hardware for upgraded variants such as DM01-K, DM01-K-V1.4 and DM01-K-SN. This base motion control module performs encoder signal acquisition, closed-loop position calculation and command output for Delem legacy sheet metal CNC systems. As a reliable CNC position feedback unit, it communicates with the operator panel via Delem proprietary internal bus and delivers analog drive signals to proportional hydraulic valves or servo drives. This Delem core axis module is widely stocked as original replacement spare hardware, used to restore positioning performance during maintenance and retrofitting of ageing press brake control systems.

Basic Parameters

Brand: Delem

Model: DM01

Type: Base motion control module

Supply voltage: 24 VDC

Encoder interface: Incremental encoder input

Control output: Analog signal for drive regulation

Communication: Delem proprietary internal system bus

Auxiliary terminals: Digital I/O for interlock and status feedback

Mounting: Rack installation inside control cabinet

Compatible system: Legacy Delem DA and DM series CNC control systems

Product type: Original Delem core motion spare module

Supported Functions

This base motion control module continuously captures high-resolution position feedback from encoders. The CNC position feedback unit calculates positioning deviation and outputs adjusted control commands to connected drives. It transmits real-time position data and fault diagnostic information back to the Delem HMI panel. This Delem core axis module supports travel limit monitoring, safety motion interlock and stable continuous operation under industrial workshop conditions.

Core Functions

Built-in closed-loop algorithm compares target position and actual encoder feedback to minimize positioning error. The base motion control module reliably forwards motion instructions and position feedback between the HMI and field actuators. Onboard detection circuits identify encoder loss, bus communication breakdown and abnormal drive signals, and send alarm notifications to the operator panel. Its standard pin definition supports direct substitution for the faulty base unit without large-scale rewiring.

Hardware Specifications & Environmental Features

Mounting: Rack mounting inside control cabinet

Operating temperature: 0 °C to +55 °C

Storage temperature: -20 °C to +70 °C

Relative humidity: 5% – 90%, non-condensing

PCB treatment: Conformal coating for dust and moisture resistance

Condition: Original new or fully tested refurbished Delem spare part

Industry Applications: Applied in legacy petrochemical distributed control, old paper making production automation, material handling conveyor lines, packaging and textile machinery, water treatment remote signal collection and large conveyor remote I/O control racks.

Note: Confirm 800 series backplane compatibility, pulse signal type, counting mode and preset logic before ordering.

This is from our current stock.

available stock.xlsx